Cranberry
TWP, PA
See Change Journal
at Bottom of Document
Cymphonix Network Composer
Unique Traits:
·
This is a web filter appliance
·
A network CAT-5 (RJ-45) bypass coupler is taped to the bottom of the
unit in case you need to bypass the device.
Kathy/Joe has been shown how to operate the coupler.
Cymphonix
Customer Support
Contact Cymphonix Support at 801-938-1500 (opt. 2) or by email at support@cymphonix.com.
Support is available from 7:00am to 5:00pm Mountain Time.
Configuration:
Model Number.............................................. DC10
Licensed Network
Nodes........................... 25
Serial Number.............................................. 0929A061917
License Key.................................................. 81B4-F216-E601-BD81
Device ID......................................................
ASM Expires................................................ Jan.1,
2010
Software Version......................................... 8.7.2
IP Address:................................................... 10.1.11.2
Subnet Mask:............................................... 255.255.255.0
Default Gateway:.......................................... 10.1.11.1
DNS Server IP:............................................. 10.1.11.9
Access:......................................................... http
Logon:........................................................... see
authentication document
Management Port IP:................................... 10.1.1.1
Management Port
Subnet Mask:............... 255.255.255.0
Download speed
setting:............................ 10,000
Kbps
Upload speed
setting:................................. 1,000
Kbps
Defined routed
networks.............................
Email server:................................................ 10.1.11.9
LDAP Server Settings
Server IP Address:...................................... 10.1.11.9
Port Number:................................................ 389
Server Base
Distinguished Name:............ DC=Ampco,DC=com
Server
Username:........................................ Ampco\mshevlin
Agent password:.......................................... See
authentication document
Server Base
Distinguished Name:............ DC=Ampco,DC=com
Server Username:........................................ Ampco\mshevlin
Agent password:.......................................... See
authentication document
Groups
LDAP configuration notes:
The Cymphonix Network
Composer is able to report and block by Active Directory username and computer
name. To make this work, three things
need to be set up on the appliance.
First, the
appliance needs to know how to query Active Directory. This is done on the Admin -> Configuration
-> LDAP page using the settings listed above.
Second, a “Directory Agent” needs to be installed
on the Active Directory Domain Controller server. You can obtain the directory agent directly
from the appliance on the Admin -> Downloads -> Directory/LDAP Software
page. Once that’s done, go to the Manage
-> Directory Agent page and create a new Directory Agent specifying what
server you installed the agent. The
agent works over TCP port 3462 by default.
The third and last
piece, is to run the Cymphonix Directory Agent Client Utility (cymdir.exe) on
each workstation on the network. This
agent needs to execute every time the user logs in and stays resident in memory
so it’s best to put it in the login script; either through a batch file or group
policy login script. This utility tells
the Cymphonix Composer when the user logs in and out of the network. This executes in the login script using this
command:
start \\STF-PGH-SBS-1\netlogon\cymdir.exe /ad /silent
10.1.11.2
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Document Change Journal:
9/8/2009 – CMD – Unit turn-up
7/7/2011 – PSM – I noted that the IP
address mentioned below was 10.1.11.9, but the Cymphonix’s IP was 10.1.11.2,
and this was correct in the logon script.